RGB Signal Amplifier

 If you need to operate long or multiple lengths of RGB LED strip and want to use just one remote controller to synchronise the effects then the amplifier is for you.

You will need one controller in any case to create the effects and colours of the RGB LED strip and then think of the amplifier as a slave to this controller.

The amplifier is required to be connected to the controller, utilising the RGB and positive cables, these will carry the signal commands as an input to the amplifier.

The amplifier also has a 12v input and output of RGB and positive cables to the next run of strip.

The output capacity of the amplifier is 144w, you can therefore use the amplifier to run up to 20m of RGB LED strip. You will need the correct sized driver to accommodate this output, in this case, the 150w LED driver.

The amplifier has two fixing points situated on the base so the unit can be concealed.

The green connector blocks are removable to enable easy cable connections.  Once cabled they just push back into the amplifier housing.

Please Note: This product is dispatched from our warehouse in England and may arrive in a different package to the rest of your order.